Set of four harder-composite suspension arms includes 2 lower arms (front/rear), 1 front upper arm, 1 rear upper arm. Two complete sets will replace all arms on NT18 and M18. 

Set of 2 molded harder-composite front upper suspension arms for XRAY M18 and NT18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6° caster vs. 12° caster stock). These arms provide improved steering, better handling into and out of corners. Highly recommended for serious racing and high competition… prepare to drop your lap times! 

Set of matched left and right composite suspension blocks. Fits front or rear. 

Adjustable turnbuckle for steering. 

Set of six linkages and ball joints includes center linkage, steering linkage between front steering blocks, rear toe-in linkages 4°, ball joints for front steering turnbuckle, and shim that is used between the left suspension block and servo linkage. 

Complete set of adjustable turnbuckles for adjusting front and rear toe on M18. A ‶must have※ for serious racers who need to precisely adjust front or rear toe. Set includes threaded rods, balljoints, and pivotballs. 

Molded composite drive shafts with hex adaptors. Comes unassembled. Set of 2. 

Aluminum main driveshaft for XRAY M18, M18PRO. 

Complete set of composite pivot balls. 

M3x4 setscrew, hex drive. Set of 10 pieces. 

M2.2x6 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.2x10 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.2x14 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.5x12 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.5x12 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

High-quality ball-bearings ID x OD x thickness (mm) = 6x10x3mm. Set of 2 pieces. 

Polished chrome pin. Dia. x length = 2mm x 8mm. Set of 10 pieces.